H-530

The H-530 is a simple Nozzle which is a variation of the nonclog principle. Nozzle consists of two parts, the Body which contains the inlet pipe connection and the orifice; and a Cap which forms the bottom of the Swirl Chamber. The solid cone spray is uniformly distributed over the entire area of coverage. Typically used where a right angle connection is required for gas scrubbing, rinsing, washing, quenching and dust control.

Spray Angles: 80° at 40 PSI.

Material: Brass. Available as a special in any machinable material.

Pipe Connections:1/4″, 3/8″, 1/2″, 3/4″ female NPT.

H-530 Capacities: Gallons Per Minute
Pipe Size Nozzle No. * Operating Pressure: Lbs. Per Square Inch
10 20 30 40 60 80 100
1/4″ 62 0.26 0.36 0.44 0.51 0.62 0.72 0.81
78 0.38 0.58 0.70 0.83 1.0 1.2 1.3
93 0.60 0.85 1.0 1.2 1.5 1.7 1.9
104 0.75 1.0 1.3 1.5 1.8 2.1 2.4
109 0.80 1.1 1.4 1.6 2.0 2.3 2.5
140 1.0 1.5 1.8 2.1 2.6 3.0 3.3
156 1.3 1.8 2.2 2.5 3.1 3.5 4.0
171 1.4 2.0 2.5 2.9 3.6 4.1 4.6
187 1.5 2.1 2.6 3.0 3.7 4.2 4.7
3/8″ 234 2.5 3.5 4.3 5.0 6.1 7.1 7.9
250 3.3 4.7 5.8 6.7 8.2 9.4 10.6
1/2″ 281 4.2 5.9 7.2 8.3 10.2 11.8 13.2
3/4″ 312 5.3 7.5 9.1 10.6 13.0 15.0 16.7
343 5.7 8.0 9.8 11.3 13.8 16.0 17.8
375 6.6 9.3 11.4 13.2 16.2 18.6 20.8
406 7.6 10.7 13.1 15.1 18.5 21.3 23.8

H-530


Pipe Size Dimensions Weight (oz.)
A B C D
1/4 1 5/16 25/32 5/8 5/8 2
3/8 1 21/32 15/18 3/4 3/4 3 1/2
1/2 1 15/16 1 7/32 7/8 1 7
3/4 2 1/2 1 9/16 1 1/4 1 1/4 13 1/2