H-535 High Velocity Nozzle

The H-535 is a single nozzle, one piece. The unique «of the oval hole milling and produce a very thin sheet of high cutting speed was found to be ideal for the car wash, commercial dish washers and other applications where speed is important aerosol.
 
Material: Brass: 303 Stainless Steel. Other materials, to order.
 
Spray Angles: 30 ° to 90 ° in steps 10th at 40 PSI.
 
Pipe Connection: 1/8 «and 1/4″ NPT male.
H-535 Capacities: Gallons Per Hour
Figure No. Lift (inches) Air Pressure: Lbs. Per Square Inch
5 10 12 15
H-601 6 1.3 2.5 2.8 3.3
H-601 3 2.4 3.6 4.0 4.4
H-601-G 6 .13 .20 .22 .24
H-601-F 6 .24 .33 .34 .39
H-601-E 6 .45 .67 .68 .70
H-601-D 6 .65 1.1 1.15 1.2
H-601-C 6 1.1 1.8 2.0 2.2
AIR-SCFM Any .9 1.3 1.5 1.7

H-535 Capacities: Gallons Per Minute
Nozzle No. Operating Pressure: Lbs. Per Square Inch
10 20 30 40 60 80 100
.20   .14 .17 .20 .25 .28 .32
.35   .24 .30 .35 .43 .49 .55
.40   .28 .34 .40 .49 .56 .63
.44   .31 .38 .44 .54 .62 .70
.50   .35 .43 .50 .62 .70 .79
.60 .30 .42 .52 .60 .73 .85 .95
.75 .37 .53 .65 .75 .93 1.1 1.2
.90 .45 .64 .78 .92 1.1 1.3 1.4
1.0 .50 .71 .86 1.0 1.2 1.4 1.6
1.3 .65 .92 1.1 1.3 1.6 1.8 2.1
1.5 .75 1.1 1.3 1.5 1.8 2.1 2.4
2.0 1.0 1.4 1.7 2.0 2.5 2.8 3.2
2.0 1.5 2.1 2.6 3.0 3.7 4.2 4.7
4.0 2.0 2.8 3.5 4.0 4.9 5.7 6.3

H-535