hp-Single pressure accumulator wall unit series DSK 4.1

hp-Single pump wall unit with pressure accumulator control

with hp internal gear pump horizontally mounted on the oil pan with overflow valve and all required fittings;
with safety control: a pressure transmitter switches the pump off in case of underpressure.

Independently controls fuel oil supply unit with pressure membrane for single pumping oil supply according to DIN/EN 12514-1 of automatic oil burners.
Supply unit – built, tested, registered and marked according to DIN 12514-1!

Delivery including oil leakage detector.

Pipe dimensions according to phase calculation. For assembly and commissioning as well as maintenance, observe the operating instruction enclosed with each unit.

1) Different delivery heads upon request. 2) These units have a motor output of 400 V and a rotational speed of 1400 RPM. *For faultless pump functionality, all pipes must be dimensioned according to fluidic basics via phase calculation according to the local conditions! Pump and device connection does not provide any information regarding the respective pipe dimension. Note regarding flanged model:EO pipe screw connection for steel pipes DIN 1630 and 2391, if Cu pipes are used, the corresponding EO supporting bushing must be used!