TUV Rheinland Single pumping unit for fuel oil in screwed or flanged compact execution, as a feed- or delivery aggregates for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.

General details:

Operating viscosity:The motor output data applies for fluids with a viscosity up to 80 cSt. From 80 cSt to 150 cSt, the motor must be one power stage size stronger. Available at a surcharge upon request.

Max. suction head:Measured in terms of the manometer (Pos. 5) = -0,6 bar

Max. inlet pressure:Pressure load of the axial face seal: – 0,6 – +5 bar

Max. nozzle loss:70% of discharge at pmax

Категория:
Single pumping unit MOG 50 according to scheme I without bypass
Single pumping unit MOG 50/51
Single pumping unit MOG 51 according to scheme I without bypass
Single pumping unit MOG 50/51* To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site. The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used.
Dimensional drawing MOG according scheme I
hp-Single-pumping unit series MOG hp-Single-pumping unit series MOG

Отзывы

Отзывов пока нет.

Будьте первым, кто оставил отзыв на “Single pumping unit MOG 50/51”