Single pumping unit MOG 53

Single pumping unit for fuel oil in scewed or flanged compact execution, as a feed- or delivery aggregate for oil supply of automatic oil burners – equivalent DIN/EN 4755/2. Produced, tested, registered and marked according to the test standard DIN/EN 12514/1.

General details

Operating viscosity:The motor output data applies for fluids with a viscosity up to 150 cSt.

Max. suction head:Measured in termes of the manometer (Pos. 5) = -0,6 bar

Max. inlet pressure:Pressure load of the axial face seal: -0,6 to max. 5 bar (refer picture page 18)

Max. nozzle loss:70% of discharge at pmax

[su_accordion] [su_spoiler title=”Single pumping unit MOG 53 according to scheme I without bypass”] Single pumping unit MOG 53

Article-no. for accessories

Single pumping unit MOG 53 * To insure proper pump function, all pipe connections must be sized as per the principles of fluid technology using the phase quantity and in accordance with the given conditions at the installation site. The size of the pump and/or device connections is not indicative of the size of the pipe connection which must be used. Note for the screwed version: When using a Cu pipe it is imperative that the appropriate EO supporting sleeve be used for EO threaded pipe attachments for DIN 1630 and 2391 steel pipes. [/su_spoiler] [su_spoiler title=”Dimensional drawing MOG according scheme I”] hp-Single-pumping unit series MOG hp-Single-pumping unit series MOG[/su_spoiler] [/su_accordion]