High-capacity single suction aggregates

Single units HSPE series

This hp oil supply is for fireplaces that are far or high from the storage tank. The suction units can handle underpressures up to -0.9 bar, which is 9 m geodetic height or even up to 200 m suction pipe length.

Technical Data:

Details and applications:

  • Self-controlling high capacity suction unit for single pipe oil supply of burners with safety shut-off
  • Delivery complete with oil pan and leakage detector
  • Consisting of:
    • Operating tank, hp-Internal gear pump
    • Control system with operating and fault indicator
    • Level sensor with safety shut-off of measurement transducer
    • Potential-free fault message
    • Secure against dry running and overtemperature shut-down
    • Connection for solenoid valve and audible warning signal available
    • Filter and nonreturn valve
Single units HSPE series - HSPE 30 - Standard
HSPE 30 Standard
Single units HSPE series - HSPE 60
HSPE 60
Single units HSPE series - HSPE 700
HSPE 700

Overview Table

Model Discharge
l/h
ave. 1)
Extraction
quantity l/h
Motor power 2) Item No. max. burner
connections
Weight
Kg
approx.
230 V Alternating current 400 V Rotary current HSPE additional burner connections
HSPE 30 – Standard – 6042 80 50 0,18 kW 430002 430200 2 25
HSPE 60 – 6044 160 120 0,18 kW 430008 430200 4 8
HSPE 200 – 6045 300 200 0,18 kW 430014 430201 4 0
HSPE 200 – 6047 600 400 0,18 kW 430024 430201 4 0
HSPE 700 BHP 1000 700 0,75 kW 430030 430202 5 145
HSPE 700 BHM 1500 1000 0,75 kW 430038 430202 5 145
HSPE 700 BHG 2000 1500 0,75 kW 430040 430202 5 145
HSPE 1500 BHGP 3000 2200 1,10 kW 430048 430210 5 200
Leakage detector in plug-in casing Type LMS for 230 V (for description see page 83).
Leakage detector in control system integrated Type LMP for 230/400 V
From HSPE 30, additional spill protection to VbF or WHG permitted 720713
For further dimensions see page 52.

The HSPE 30 and 60 may be supplied with 4 feet, as desired (see price list).

Maintenance: The HSPE suction units are maintenance-free, only the suction filter is to be cleaned regularly.

All models installed, tested and registered suitable for heating oil EL, to DIN/EN 12514-1 and DIN 4755 part 2.

1) As the discharge basically depends on the viscosity of the medium, the suction length, the suction resistance, the suction height, the pipe diameter and the temperature, a technical fine-tuning is required in each individual case.
2) Motor voltages 230 V or 230/400 V, 50 Hz

Performance Curves

hp-Suction units Series HSP Based on empirical determination with heating oil EL at 20 °C.

These performance curves are based on tests with optimum pipe flow and may only be considered as guidelines. Not all usage cases can be derived from them. Copying, duplication or forwarding to third parties requires our written permission.

Need additional infos? Please contact us

Jochen Twellaar

+49 (0) 721/95618-23

twellaar@hptechnik.com

Joachim Rau

+49(0) 721/95618-25

rau@hptechnik.com