{"id":84635,"date":"2021-05-25T16:19:03","date_gmt":"2021-05-25T14:19:03","guid":{"rendered":"https:\/\/hptechnik.com\/downloads\/spray-patterns-and-flow-table\/"},"modified":"2021-08-04T22:41:34","modified_gmt":"2021-08-04T20:41:34","password":"","slug":"spray-patterns-and-flow-table","status":"publish","type":"docs","link":"https:\/\/hptechnik.com\/en\/downloads\/spray-patterns-and-flow-table\/","title":{"rendered":"Spray patterns and flow table"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\n\t\t\t\t\t\t
\n\t\t\t\t\n\t\t\t\t<\/path><\/svg>\t\t\t\t<\/a>\n\t\t\t<\/div>\n\t\t\t\n\t\t\t\t\t\t
\n\n\t\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\n\t\t\t\t\t\t\tProducts \/ Nozzles\t\t\t\t\t\t<\/a>\n\t\t\t\t\t<\/p>\n\t\t\t\t\n\t\t\t\t\n\t\t\t<\/div>\n\t\t\t\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\"Nozzles,\t\t\t\t\t\t\t\t<\/a>\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

All MONARCH nozzles are stamped with the following characteristics, subject to modification on adoption of CEN standards:
\n– the flow (in USGPH at l00 PSI = 6.895 bar), (soon, capacity at 10 bar and CEN references);
\n– spray angle; – letters to identify the series of spray patterns;
\n– the, reference MTD-92; – the, MONARCH trade mark.<\/p>\n

Each MTD-92 nozzle is individually tested at several different production stages to assure perfect conformity with master nozzles of each series.<\/p>\n

The spray patterns (i.e. hollow cone or solid cone) described below refer to the tests carried out with a 60 \u00b0C angle at a 75 mm distance
\nfrom the nozzle orifice. In nozzles of 60 \u00b0C spray angle or less, and for low flows in particular, the empty section of a hollow cone becomes smaller.
\nThe difference between hollow cone and solid cone practically disappears.<\/p>\n

Solid cone \u201cR\u201d series: 0.35 to 3.50 GPH<\/strong>
\nThis is the series supplied regularly unless customer specifies otherwise. It is a good all-round nozzle suitable for most burners. Atomization of the oil is not quite as fine as with the \u201cNS\u201d series.<\/p>\n

Hollow cons \u201cNS\u201d series: 0.40 to 2.00 GPH<\/strong>
\nThis series works best on many burners due to its exceptionally fine atomization.
\nProduces a quiet stable flame. Widely used in 80 \u00b0C and 90 \u00b0C on flame retention burners.<\/p>\n

Special solid cone \u201cAR\u201d series: 0.60 to 3.50 GPH<\/strong>
\nThis series has become widely used due to its success in obtaining quiet combustion in some flame retention head burners. Traditionally a \u201ccure-all\u201d replacement nozzle, it now is increasingly specified on original equipment.<\/p>\n

Semi-solid cone \u201cPLP\u201d series: 2.25 to 100.00 GPH<\/strong>
\nThe standard nozzle for larger capacities. Fine atomization and \u201csolid\u201d spray pattern up to about 3.50 GPH, gradually becoming more and more \u201chollow\u201d in the larger sizes.<\/p>\n

Hollow cone \u201cPL\u201d series: 2.25 to 50.00 GPH<\/strong>
\nThis series represents an extension of the \u201cNS\u201d type spray pattern to larger capacity sizes.
\nSpray is not as finely atomized as the \u201cPLP\u201d series, but produces the best results in equipment specifying hollow cone nozzles.<\/p>\n

Narrow spray angle \u201cHV\u201d series: 1.65 to 60.00 GPH<\/strong>
\nUsed mostly for Semi-Industrial or Scotch Marine applications where narrow spray angle and high spray velocity is essential and some combustion noise is not objectionable.<\/p>\n

Heavy oil nozzle \u201cHO\u201d series: 1.25 to 100.00 GPH<\/strong>
\nDesigned for use on 70 SSU (approx. 13 centistokes) operating viscosity oil at operating pressures ranging from 200-450 PSIG (13.8 to 31 bar). Write for special data sheet.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
<\/td>\nCapacity in l\/h at a pressure of (bar):<\/strong><\/td>\n<\/tr>\n
<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/td>\n<\/tr>\n
Nominal size<\/b><\/td>\n1,0<\/b><\/td>\n5,2<\/b><\/td>\n7,0<\/b><\/td>\n8,8<\/b><\/td>\n10,4<\/b><\/td>\n12,2<\/b><\/td>\n14,0<\/b><\/td>\n<\/tr>\n
0,40<\/td>\n–<\/td>\n–<\/td>\n1,51<\/td>\n1,70<\/td>\n1,85<\/td>\n2,00<\/td>\n2,12<\/td>\n<\/tr>\n
0,45<\/td>\n–<\/td>\n–<\/td>\n1,70<\/td>\n1,90<\/td>\n2,07<\/td>\n2,24<\/td>\n2,40<\/td>\n<\/tr>\n
0,50<\/td>\n–<\/td>\n–<\/td>\n1,89<\/td>\n2,12<\/td>\n2,30<\/td>\n2,50<\/td>\n2,68<\/td>\n<\/tr>\n
0,55<\/td>\n–<\/td>\n–<\/td>\n2,08<\/td>\n2,33<\/td>\n2,53<\/td>\n2,75<\/td>\n2,94<\/td>\n<\/tr>\n
0,60<\/td>\n–<\/td>\n–<\/td>\n2,27<\/td>\n2,53<\/td>\n2,80<\/td>\n2,99<\/td>\n3,21<\/td>\n<\/tr>\n
0,65<\/td>\n–<\/td>\n–<\/td>\n2,46<\/td>\n2,76<\/td>\n3,03<\/td>\n3,25<\/td>\n3,48<\/td>\n<\/tr>\n
0,75<\/td>\n–<\/td>\n–<\/td>\n2,83<\/td>\n3,18<\/td>\n3,48<\/td>\n3,74<\/td>\n4,01<\/td>\n<\/tr>\n
0,85<\/td>\n–<\/td>\n–<\/td>\n3,18<\/td>\n3,59<\/td>\n3,93<\/td>\n4,27<\/td>\n4,54<\/td>\n<\/tr>\n
1,00<\/td>\n1,43<\/td>\n3,29<\/td>\n3,78<\/td>\n4,24<\/td>\n4,65<\/td>\n4,99<\/td>\n5,33<\/td>\n<\/tr>\n
1,10<\/td>\n1,57<\/td>\n3,59<\/td>\n4,16<\/td>\n4,65<\/td>\n5,07<\/td>\n5,49<\/td>\n5,86<\/td>\n<\/tr>\n
1,20<\/td>\n1,71<\/td>\n3,93<\/td>\n4,54<\/td>\n5,07<\/td>\n5,56<\/td>\n6,02<\/td>\n6,43<\/td>\n<\/tr>\n
1,25<\/td>\n1,79<\/td>\n4,05<\/td>\n4,73<\/td>\n5,26<\/td>\n5,80<\/td>\n6,24<\/td>\n6,70<\/td>\n<\/tr>\n
1,35<\/td>\n1,93<\/td>\n4,43<\/td>\n5,11<\/td>\n5,71<\/td>\n6,24<\/td>\n6,77<\/td>\n7,23<\/td>\n<\/tr>\n
1,50<\/td>\n2,14<\/td>\n4,92<\/td>\n5,67<\/td>\n6,36<\/td>\n6,96<\/td>\n7,49<\/td>\n8,02<\/td>\n<\/tr>\n
1,65<\/td>\n2,35<\/td>\n5,41<\/td>\n6,24<\/td>\n6,69<\/td>\n7,64<\/td>\n8,25<\/td>\n8,85<\/td>\n<\/tr>\n
1,75<\/td>\n2,50<\/td>\n5,70<\/td>\n6,62<\/td>\n7,42<\/td>\n8,10<\/td>\n8,78<\/td>\n9,38<\/td>\n<\/tr>\n
2,00<\/td>\n2,86<\/td>\n6,55<\/td>\n7,57<\/td>\n8,47<\/td>\n9,27<\/td>\n10,00<\/td>\n10,70<\/td>\n<\/tr>\n
2,25<\/td>\n3,21<\/td>\n7,38<\/td>\n8,51<\/td>\n9,53<\/td>\n10,37<\/td>\n11,30<\/td>\n12,00<\/td>\n<\/tr>\n
2,50<\/td>\n3,57<\/td>\n8,17<\/td>\n9,46<\/td>\n10,60<\/td>\n11,58<\/td>\n12,50<\/td>\n13,40<\/td>\n<\/tr>\n
3,00<\/td>\n4,28<\/td>\n9,80<\/td>\n11,35<\/td>\n12,70<\/td>\n13,93<\/td>\n15,00<\/td>\n16,10<\/td>\n<\/tr>\n
3,50<\/td>\n5,0<\/td>\n11,46<\/td>\n13,24<\/td>\n14,80<\/td>\n16,23<\/td>\n17,50<\/td>\n18,70<\/td>\n<\/tr>\n
4,00<\/td>\n5,71<\/td>\n13,10<\/td>\n15,14<\/td>\n16,90<\/td>\n18,50<\/td>\n20,10<\/td>\n21,40<\/td>\n<\/tr>\n
4,50<\/td>\n6,43<\/td>\n14,76<\/td>\n17,03<\/td>\n19,10<\/td>\n20,80<\/td>\n22,50<\/td>\n24,00<\/td>\n<\/tr>\n
5,00<\/td>\n7,14<\/td>\n16,40<\/td>\n18,90<\/td>\n21,20<\/td>\n23,20<\/td>\n25,00<\/td>\n26,70<\/td>\n<\/tr>\n
5,50<\/td>\n7,86<\/td>\n18,00<\/td>\n20,80<\/td>\n23,30<\/td>\n25,50<\/td>\n27,50<\/td>\n29,40<\/td>\n<\/tr>\n
6,00<\/td>\n8,56<\/td>\n19,60<\/td>\n22,70<\/td>\n25,40<\/td>\n27,70<\/td>\n30,00<\/td>\n32,10<\/td>\n<\/tr>\n
6,50<\/td>\n9,30<\/td>\n21,30<\/td>\n24,60<\/td>\n27,50<\/td>\n30,10<\/td>\n32,50<\/td>\n34,80<\/td>\n<\/tr>\n
7,00<\/td>\n10,00<\/td>\n22,90<\/td>\n26,50<\/td>\n29,60<\/td>\n32,50<\/td>\n35,00<\/td>\n37,50<\/td>\n<\/tr>\n
7,50<\/td>\n10,70<\/td>\n24,60<\/td>\n28,40<\/td>\n31,70<\/td>\n34,80<\/td>\n37,50<\/td>\n40,10<\/td>\n<\/tr>\n
8,00<\/td>\n11,40<\/td>\n26,20<\/td>\n30,30<\/td>\n33,80<\/td>\n37,00<\/td>\n40,20<\/td>\n42,80<\/td>\n<\/tr>\n
8,50<\/td>\n11,85<\/td>\n27,80<\/td>\n32,20<\/td>\n36,00<\/td>\n39,50<\/td>\n42,60<\/td>\n45,70<\/td>\n<\/tr>\n
9,00<\/td>\n12,80<\/td>\n29,50<\/td>\n34,00<\/td>\n38,20<\/td>\n41,60<\/td>\n45,00<\/td>\n48,00<\/td>\n<\/tr>\n
9,50<\/td>\n13,60<\/td>\n31,30<\/td>\n36,00<\/td>\n40,10<\/td>\n44,30<\/td>\n47,70<\/td>\n51,10<\/td>\n<\/tr>\n
10,00<\/td>\n14,20<\/td>\n32,80<\/td>\n37,80<\/td>\n42,40<\/td>\n46,40<\/td>\n50,00<\/td>\n53,40<\/td>\n<\/tr>\n
10,50<\/td>\n15,00<\/td>\n34,40<\/td>\n39,70<\/td>\n44,30<\/td>\n48,80<\/td>\n52,60<\/td>\n56,40<\/td>\n<\/tr>\n
11,00<\/td>\n15,70<\/td>\n36,00<\/td>\n41,60<\/td>\n46,60<\/td>\n51,00<\/td>\n55,00<\/td>\n58,80<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Nominal size<\/b><\/td>\nCapacity in l\/h at a pressure of (bar):<\/b><\/td>\n<\/tr>\n
<\/td>\n<\/tr>\n
1,1<\/b><\/td>\n5,2<\/b><\/td>\n7,0<\/b><\/td>\n8,8<\/b><\/td>\n10,4<\/b><\/td>\n12,2<\/b><\/td>\n14,0<\/b><\/td>\n<\/tr>\n
11,50<\/td>\n16,40<\/td>\n37,80<\/td>\n43,40<\/td>\n48,60<\/td>\n53,30<\/td>\n57,60<\/td>\n61,50<\/td>\n<\/tr>\n
12,00<\/td>\n17,10<\/td>\n39,60<\/td>\n45,20<\/td>\n50,70<\/td>\n55,60<\/td>\n60,20<\/td>\n64,30<\/td>\n<\/tr>\n
12,50<\/td>\n17,80<\/td>\n41,10<\/td>\n47,20<\/td>\n52,80<\/td>\n57,90<\/td>\n62,60<\/td>\n66,90<\/td>\n<\/tr>\n
13,00<\/td>\n18,60<\/td>\n42,60<\/td>\n49,20<\/td>\n55,00<\/td>\n60,20<\/td>\n65,00<\/td>\n69,60<\/td>\n<\/tr>\n
13,50<\/td>\n19,35<\/td>\n44,10<\/td>\n51,10<\/td>\n57,00<\/td>\n62,60<\/td>\n67,80<\/td>\n72,50<\/td>\n<\/tr>\n
14,00<\/td>\n20,00<\/td>\n45,80<\/td>\n53,00<\/td>\n59,20<\/td>\n65,00<\/td>\n70,00<\/td>\n75,00<\/td>\n<\/tr>\n
14,50<\/td>\n20,70<\/td>\n47,50<\/td>\n54,90<\/td>\n61,30<\/td>\n67,30<\/td>\n72,50<\/td>\n77,60<\/td>\n<\/tr>\n
15,00<\/td>\n21,40<\/td>\n49,20<\/td>\n56,80<\/td>\n63,40<\/td>\n69,60<\/td>\n75,00<\/td>\n80,20<\/td>\n<\/tr>\n
15,50<\/td>\n22,20<\/td>\n50,60<\/td>\n58,66<\/td>\n65,60<\/td>\n71,70<\/td>\n77,80<\/td>\n82,80<\/td>\n<\/tr>\n
16,00<\/td>\n22,80<\/td>\n52,40<\/td>\n60,60<\/td>\n67,60<\/td>\n74,00<\/td>\n80,40<\/td>\n85,60<\/td>\n<\/tr>\n
17,00<\/td>\n23,70<\/td>\n55,00<\/td>\n64,40<\/td>\n72,00<\/td>\n79,00<\/td>\n85,20<\/td>\n91,40<\/td>\n<\/tr>\n
17,50<\/td>\n25,00<\/td>\n57,10<\/td>\n66,20<\/td>\n74,20<\/td>\n81,00<\/td>\n87,80<\/td>\n93,90<\/td>\n<\/tr>\n
18,00<\/td>\n25,60<\/td>\n59,00<\/td>\n68,00<\/td>\n76,40<\/td>\n83,20<\/td>\n90,00<\/td>\n96,00<\/td>\n<\/tr>\n
19,00<\/td>\n27,20<\/td>\n62,60<\/td>\n72,00<\/td>\n80,20<\/td>\n88,60<\/td>\n95,40<\/td>\n102,20<\/td>\n<\/tr>\n
19,50<\/td>\n27,80<\/td>\n64,00<\/td>\n73,90<\/td>\n82,50<\/td>\n90,50<\/td>\n97,60<\/td>\n104,50<\/td>\n<\/tr>\n
20,00<\/td>\n28,40<\/td>\n65,60<\/td>\n75,60<\/td>\n84,80<\/td>\n92,80<\/td>\n100,00<\/td>\n106,80<\/td>\n<\/tr>\n
20,50<\/td>\n29,20<\/td>\n67,20<\/td>\n77,50<\/td>\n86,70<\/td>\n95,20<\/td>\n102,60<\/td>\n109,80<\/td>\n<\/tr>\n
21,00<\/td>\n30,00<\/td>\n68,80<\/td>\n79,40<\/td>\n88,60<\/td>\n97,60<\/td>\n105,20<\/td>\n112,80<\/td>\n<\/tr>\n
21,50<\/td>\n30,70<\/td>\n70,40<\/td>\n81,40<\/td>\n90,90<\/td>\n99,90<\/td>\n107,50<\/td>\n115,00<\/td>\n<\/tr>\n
22,00<\/td>\n31,40<\/td>\n72,00<\/td>\n83,20<\/td>\n93,20<\/td>\n102,00<\/td>\n110,00<\/td>\n117,60<\/td>\n<\/tr>\n
23,00<\/td>\n32,80<\/td>\n75,60<\/td>\n86,80<\/td>\n97,20<\/td>\n106,60<\/td>\n115,20<\/td>\n123,00<\/td>\n<\/tr>\n
24,00<\/td>\n34,30<\/td>\n78,70<\/td>\n90,90<\/td>\n101,40<\/td>\n111,30<\/td>\n120,40<\/td>\n128,70<\/td>\n<\/tr>\n
25,00<\/td>\n35,60<\/td>\n82,20<\/td>\n94,40<\/td>\n105,60<\/td>\n115,80<\/td>\n124,40<\/td>\n133,80<\/td>\n<\/tr>\n
28,00<\/td>\n40,00<\/td>\n91,60<\/td>\n106,00<\/td>\n118,50<\/td>\n129,80<\/td>\n140,00<\/td>\n149,90<\/td>\n<\/tr>\n
29,00<\/td>\n41,40<\/td>\n95,00<\/td>\n109,80<\/td>\n122,60<\/td>\n134,60<\/td>\n145,00<\/td>\n155,20<\/td>\n<\/tr>\n
30,00<\/td>\n42,80<\/td>\n98,40<\/td>\n113,50<\/td>\n127,20<\/td>\n139,30<\/td>\n150,30<\/td>\n160,90<\/td>\n<\/tr>\n
35,00<\/td>\n50,00<\/td>\n114,70<\/td>\n132,50<\/td>\n148,00<\/td>\n162,40<\/td>\n175,20<\/td>\n187,40<\/td>\n<\/tr>\n
40,00<\/td>\n57,20<\/td>\n131,00<\/td>\n151,40<\/td>\n169,20<\/td>\n185,50<\/td>\n200,60<\/td>\n213,80<\/td>\n<\/tr>\n
45,00<\/td>\n64,20<\/td>\n147,60<\/td>\n170,30<\/td>\n191,00<\/td>\n209,00<\/td>\n225,20<\/td>\n241,10<\/td>\n<\/tr>\n
50,00<\/td>\n71,30<\/td>\n163,90<\/td>\n189,20<\/td>\n211,60<\/td>\n232,00<\/td>\n250,20<\/td>\n267,60<\/td>\n<\/tr>\n
55,00<\/td>\n78,90<\/td>\n180,20<\/td>\n208,20<\/td>\n232,80<\/td>\n255,10<\/td>\n275,20<\/td>\n294,10<\/td>\n<\/tr>\n
60,00<\/td>\n86,00<\/td>\n196,80<\/td>\n227,10<\/td>\n253,60<\/td>\n278,20<\/td>\n300,50<\/td>\n318,00<\/td>\n<\/tr>\n
70,00<\/td>\n100,40<\/td>\n229,30<\/td>\n255,00<\/td>\n296,00<\/td>\n324,40<\/td>\n350,10<\/td>\n374,70<\/td>\n<\/tr>\n
80,00<\/td>\n114,70<\/td>\n262,00<\/td>\n302,80<\/td>\n338,40<\/td>\n371,00<\/td>\n401,20<\/td>\n429,60<\/td>\n<\/tr>\n
90,00<\/td>\n129,00<\/td>\n294,80<\/td>\n340,60<\/td>\n382,00<\/td>\n418,20<\/td>\n451,20<\/td>\n482,60<\/td>\n<\/tr>\n
100,00<\/td>\n143,40<\/td>\n327,40<\/td>\n378,50<\/td>\n423,50<\/td>\n464,00<\/td>\n500,80<\/td>\n535,20<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Remark<\/h4>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"Note\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

or<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Q0 = flow l\/h or kg\/h at 7 bar
\nP0 = test pressure for nominal power (generally 7 bar)<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t

\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

P1 = effective operating pressure
\nQ1 = flow intended<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

The values for the flow table relate to fuel oil EL with an average viscosity of 2.5 \u2013 3 cst (1.18 – 1.22 \u00b0 E). 100 PSI = 6.9 bar rounded up to 7 bar. 1 GPH = 3.785 l\/h.
\nThe description in the nominal size column is identical to the discharge (GPH) at an operating pressure of 7 bar.<\/p>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

Products \/ Nozzles All MONARCH nozzles are stamped with the following characteristics, subject to modification on adoption of CEN standards: – the flow (in USGPH at l00 PSI = 6.895 bar), (soon, capacity at 10 bar and CEN references); – spray angle; – letters to identify the series of spray patterns; – the, reference MTD-92; […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false,"footnotes":""},"doc_category":[385],"doc_tag":[],"class_list":["post-84635","docs","type-docs","status-publish","hentry","doc_category-nozzles"],"acf":[],"year_month":"2026-09","word_count":502,"total_views":"139","reactions":{"happy":"0","normal":"0","sad":"0"},"author_info":{"name":"hp","author_nicename":"jhchwfnadtc","author_url":"https:\/\/hptechnik.com\/en\/author\/jhchwfnadtc\/"},"doc_category_info":[{"term_name":"Nozzles","term_url":"https:\/\/hptechnik.com\/en\/downloads-category\/nozzles\/"}],"doc_tag_info":[],"yoast_head":"\nSpray patterns and flow table - hp-TECHNIK<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/hptechnik.com\/en\/downloads\/spray-patterns-and-flow-table\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Spray patterns and flow table - hp-TECHNIK\" \/>\n<meta property=\"og:description\" content=\"Products \/ Nozzles All MONARCH nozzles are stamped with the following characteristics, subject to modification on adoption of CEN standards: – the flow (in USGPH at l00 PSI = 6.895 bar), (soon, capacity at 10 bar and CEN references); – spray angle; – letters to identify the series of spray patterns; – the, reference MTD-92; […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/hptechnik.com\/en\/downloads\/spray-patterns-and-flow-table\/\" \/>\n<meta property=\"og:site_name\" content=\"hp-TECHNIK\" \/>\n<meta property=\"article:modified_time\" content=\"2021-08-04T20:41:34+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/hptechnik.com\/wp-content\/uploads\/2021\/05\/duesen-spruehbilder-und-durchsatztabelle-1024x161.gif\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"3 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/downloads\\\/spray-patterns-and-flow-table\\\/\",\"url\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/downloads\\\/spray-patterns-and-flow-table\\\/\",\"name\":\"Spray patterns and flow table - hp-TECHNIK\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/downloads\\\/spray-patterns-and-flow-table\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/downloads\\\/spray-patterns-and-flow-table\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/hptechnik.com\\\/wp-content\\\/uploads\\\/2021\\\/05\\\/duesen-spruehbilder-und-durchsatztabelle-1024x161.gif\",\"datePublished\":\"2021-05-25T14:19:03+00:00\",\"dateModified\":\"2021-08-04T20:41:34+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/downloads\\\/spray-patterns-and-flow-table\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/hptechnik.com\\\/en\\\/downloads\\\/spray-patterns-and-flow-table\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/downloads\\\/spray-patterns-and-flow-table\\\/#primaryimage\",\"url\":\"https:\\\/\\\/hptechnik.com\\\/wp-content\\\/uploads\\\/2021\\\/05\\\/duesen-spruehbilder-und-durchsatztabelle-1024x161.gif\",\"contentUrl\":\"https:\\\/\\\/hptechnik.com\\\/wp-content\\\/uploads\\\/2021\\\/05\\\/duesen-spruehbilder-und-durchsatztabelle-1024x161.gif\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/downloads\\\/spray-patterns-and-flow-table\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Downloads\",\"item\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/downloads\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"Information\",\"item\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/downloads-category\\\/information\\\/\"},{\"@type\":\"ListItem\",\"position\":4,\"name\":\"Nozzles\",\"item\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/downloads-category\\\/nozzles\\\/\"},{\"@type\":\"ListItem\",\"position\":5,\"name\":\"Spray patterns and flow table\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/#website\",\"url\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/\",\"name\":\"hp-TECHNIK\",\"description\":\"Inustriepumpen\",\"publisher\":{\"@id\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/#organization\",\"name\":\"hp-TECHNIK\",\"alternateName\":\"HP-TECHNIK GMBH Industriepumpen, F\u00f6rderaggregate und Anlagenbau\",\"url\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/hptechnik.com\\\/wp-content\\\/uploads\\\/2023\\\/03\\\/hp-technik-logo-square.png\",\"contentUrl\":\"https:\\\/\\\/hptechnik.com\\\/wp-content\\\/uploads\\\/2023\\\/03\\\/hp-technik-logo-square.png\",\"width\":500,\"height\":500,\"caption\":\"hp-TECHNIK\"},\"image\":{\"@id\":\"https:\\\/\\\/hptechnik.com\\\/en\\\/#\\\/schema\\\/logo\\\/image\\\/\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Spray patterns and flow table - hp-TECHNIK","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/hptechnik.com\/en\/downloads\/spray-patterns-and-flow-table\/","og_locale":"en_US","og_type":"article","og_title":"Spray patterns and flow table - hp-TECHNIK","og_description":"Products \/ Nozzles All MONARCH nozzles are stamped with the following characteristics, subject to modification on adoption of CEN standards: – the flow (in USGPH at l00 PSI = 6.895 bar), (soon, capacity at 10 bar and CEN references); – spray angle; – letters to identify the series of spray patterns; – the, reference MTD-92; […]","og_url":"https:\/\/hptechnik.com\/en\/downloads\/spray-patterns-and-flow-table\/","og_site_name":"hp-TECHNIK","article_modified_time":"2021-08-04T20:41:34+00:00","og_image":[{"url":"https:\/\/hptechnik.com\/wp-content\/uploads\/2021\/05\/duesen-spruehbilder-und-durchsatztabelle-1024x161.gif","type":"","width":"","height":""}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"3 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/hptechnik.com\/en\/downloads\/spray-patterns-and-flow-table\/","url":"https:\/\/hptechnik.com\/en\/downloads\/spray-patterns-and-flow-table\/","name":"Spray patterns and flow table - hp-TECHNIK","isPartOf":{"@id":"https:\/\/hptechnik.com\/en\/#website"},"primaryImageOfPage":{"@id":"https:\/\/hptechnik.com\/en\/downloads\/spray-patterns-and-flow-table\/#primaryimage"},"image":{"@id":"https:\/\/hptechnik.com\/en\/downloads\/spray-patterns-and-flow-table\/#primaryimage"},"thumbnailUrl":"https:\/\/hptechnik.com\/wp-content\/uploads\/2021\/05\/duesen-spruehbilder-und-durchsatztabelle-1024x161.gif","datePublished":"2021-05-25T14:19:03+00:00","dateModified":"2021-08-04T20:41:34+00:00","breadcrumb":{"@id":"https:\/\/hptechnik.com\/en\/downloads\/spray-patterns-and-flow-table\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/hptechnik.com\/en\/downloads\/spray-patterns-and-flow-table\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/hptechnik.com\/en\/downloads\/spray-patterns-and-flow-table\/#primaryimage","url":"https:\/\/hptechnik.com\/wp-content\/uploads\/2021\/05\/duesen-spruehbilder-und-durchsatztabelle-1024x161.gif","contentUrl":"https:\/\/hptechnik.com\/wp-content\/uploads\/2021\/05\/duesen-spruehbilder-und-durchsatztabelle-1024x161.gif"},{"@type":"BreadcrumbList","@id":"https:\/\/hptechnik.com\/en\/downloads\/spray-patterns-and-flow-table\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/hptechnik.com\/en\/"},{"@type":"ListItem","position":2,"name":"Downloads","item":"https:\/\/hptechnik.com\/en\/downloads\/"},{"@type":"ListItem","position":3,"name":"Information","item":"https:\/\/hptechnik.com\/en\/downloads-category\/information\/"},{"@type":"ListItem","position":4,"name":"Nozzles","item":"https:\/\/hptechnik.com\/en\/downloads-category\/nozzles\/"},{"@type":"ListItem","position":5,"name":"Spray patterns and flow table"}]},{"@type":"WebSite","@id":"https:\/\/hptechnik.com\/en\/#website","url":"https:\/\/hptechnik.com\/en\/","name":"hp-TECHNIK","description":"Inustriepumpen","publisher":{"@id":"https:\/\/hptechnik.com\/en\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/hptechnik.com\/en\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/hptechnik.com\/en\/#organization","name":"hp-TECHNIK","alternateName":"HP-TECHNIK GMBH Industriepumpen, F\u00f6rderaggregate und Anlagenbau","url":"https:\/\/hptechnik.com\/en\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/hptechnik.com\/en\/#\/schema\/logo\/image\/","url":"https:\/\/hptechnik.com\/wp-content\/uploads\/2023\/03\/hp-technik-logo-square.png","contentUrl":"https:\/\/hptechnik.com\/wp-content\/uploads\/2023\/03\/hp-technik-logo-square.png","width":500,"height":500,"caption":"hp-TECHNIK"},"image":{"@id":"https:\/\/hptechnik.com\/en\/#\/schema\/logo\/image\/"}}]}},"knowledge_base_info":[],"knowledge_base_slug":[],"_links":{"self":[{"href":"https:\/\/hptechnik.com\/en\/wp-json\/wp\/v2\/docs\/84635","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hptechnik.com\/en\/wp-json\/wp\/v2\/docs"}],"about":[{"href":"https:\/\/hptechnik.com\/en\/wp-json\/wp\/v2\/types\/docs"}],"author":[{"embeddable":true,"href":"https:\/\/hptechnik.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/hptechnik.com\/en\/wp-json\/wp\/v2\/comments?post=84635"}],"version-history":[{"count":0,"href":"https:\/\/hptechnik.com\/en\/wp-json\/wp\/v2\/docs\/84635\/revisions"}],"wp:attachment":[{"href":"https:\/\/hptechnik.com\/en\/wp-json\/wp\/v2\/media?parent=84635"}],"wp:term":[{"taxonomy":"doc_category","embeddable":true,"href":"https:\/\/hptechnik.com\/en\/wp-json\/wp\/v2\/doc_category?post=84635"},{"taxonomy":"doc_tag","embeddable":true,"href":"https:\/\/hptechnik.com\/en\/wp-json\/wp\/v2\/doc_tag?post=84635"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}