H-261 Direct Pressure Atomizing Nozzle

The H-261 direct pressure operated Nozzle produces a very fine hollow cone spray similar to tde F-80 Nozzle. However, it has a 1/4″ male NPT tdread, so no adaptor is needed, and it can be connected directly to a 1/4″ Tee. Material: All Brass, witd 120 mesh Monel Strainer.

Spray Angles: 45°, 60°, 80°. Sizes #3.0 to #9.50 available in 120°. All ratings are at 40 PSI.

Material: Both models, all Brass. “M” only also available in Plastic.

Pipe Connection: 1/4″ NPT male.

H-261 Capacities: Gallons Per Hour
Nozzle No.	Operating Pressure: Lbs. Per Square Inch						Min. Oper. Pressure (PSI)
Nozzle No.	25	40	60	80	100	200	Min. Oper. Pressure (PSI)
.75	–	.40	.50	.60	.65	.90	40
1.00	–	.45	.60	.65	.75	1.05	40
1.25	–	.50	.65	.75	.85	1.20	40
1.35	–	.55	.70	.80	.90	1.25	40
1.65	–	.75	.90	1.05	1.20	1.70	40
2.00	–	.95	1.15	1.30	1.50	2.10	35
2.50	–	1.15	1.40	1.60	1.80	2.55	30
3.00	1.00	1.25	1.55	1.80	2.00	2.85	25
3.50	1.30	1.65	2.00	2.30	2.60	3.65	25
4.00	1.50	1.90	2.35	2.70	3.00	4.25	20
4.50	1.90	2.40	2.95	3.40	3.80	5.40	20
5.00	2.20	2.80	3.40	3.95	4.40	6.20	20
5.50	2.40	3.05	3.70	4.30	4.80	6.80	15
6.00	2.60	3.30	4.05	4.65	5.30	7.50	15
6.50	2.80	3.55	4.35	5.00	5.60	7.90	15
7.00	3.00	3.80	4.65	5.35	6.00	8.50	15
7.50	3.20	4.05	4.95	5.75	6.40	9.05	10
8.50	3.50	4.45	5.40	625	7.00	9.90	10
9.50	3.80	4.80	5.90	6.80	7.60	10.75	10
10.50	4.10	5.20	6.35	7.35	8.20	11.60	10
12.00	4.80	6.05	7.45	8.60	9.60	13.60	10
13.50	5.45	6.90	8.45	9.75	10.90	15.40	10
15.50	6.35	8.00	9.85	11.40	12.70	18.00	10
17.50	7.20	9.10	11.20	12.90	14.40	20.40	10
19.50	8.80	11.10	13.60	15.70	17.60	24.90	10
21.50	10.50	13.30	16.30	18.80	21.00	29.70	10
24.00	11.80	14.90	18.30	21.20	23.60	33.30	10
30.00	15.00	19.00	23.20	26.90	30.00	42.40	10