Search
Close this search box.

Dosing and Special Pumps

Dosing Pump B
Dosing Pump BG
Dosing Pump IZP

Dosing and special pumps

The pumps are derived from the tried and tested hp pump program and were created for special applications – especially dosing tasks. A condition of using pumps as dosing pumps is also a medium with self-lubricating properties. The viscosity is limited to 50 000 mPa s (in special cases to 75 000 mPa s on request).

Characteristic of this are:

  • different construction sizes (for conveying quantities from 0.01 l/min)
  • altered material qualities or pairs and surface treatments
  • and shaft seals adapted to the requirements

Equipment design

  • Casing: GG 25
  • Rotor: ETG 88
  • Pinion: 16 Mn Cr 5

Shaft seal

  • Lip seals of various equipment designs

Details

  • Medium: various pouring resins, hardeners, polyurethane, epoxy resins, silicones (equipment resistant against the materials uses)
  • Viscosity: 100 – 50 000 mPa s
  • Supply pressure: 0 – 5 bar
  • Operating pressure: 30 bar
  • Direction of rotation: D = clockwise and I = counterclockwise
  • Medium temperature: 80 °C
  • Speed range: 100 – 400 RPM

Areas of application

  • chemistry
  • mechanical engineering
  • construction
  • energy
  • Agrarian
  • Marine / offshore

hp-Dosing pumps are manufactured in 3 series, each with differing discharges:

Pump model 

-l / -D -Do

Threaded connection
Suction / Delivery
Item No.
l = clockwise D = counterclockwise
IZP 8- 1/8″ 030 0191 030 0185
IZP 15- 1/8″ 030 0193 030 0187
IZP 25- 1/8″ 030 0195 030 0189
BP- 3/8″ 011 0102 011 0110
BM- 3/8″ 011 0103 011 0111
BG- 3/8″ 011 0104 011 0112
BF- 3/8″ 011 0105 011 0113
BG PP- 1/2″ 011 0118 011 0128
BG P- 1/2″ 011 0119 011 0130
BG M- 1/2″ 011 0120 011 0131
BG G- 1/2″ 011 0121 011 0132

Curves of dosing pumps for speeds 100, 200, 300 and 400 RPM, test medium Mesamoll oil (viscosity 115 mPa s, density 1,055 g/cm3)