The H-545 is our basic flat spray construction, with a square notch milling and rectangular orifice. A “fat” sheet is produced that is useful for rinsing and washing. Car washes and parts washers coomonly utilize these Nozzles.
Material:Brass and 303 Stainless Steel in 1/8″ and 1/4″ male NPT. Brass only in 3/8″, 1/2″ and 3/4″ male NPT. Other materials to order.
Spray Angles: 50, 60, 70 or 80 at 40 PSI.
Pipe Connection: 1/8″, 1/4″, 3/8″, 1/2″ and 3/4″ male NPT.
| H-545 Capacities: Gallons Per Minute | ||||||||
| Pipe Size | Nozzle No. | Operating Pressure: Lbs. Per Square Inch | ||||||
| 10 | 20 | 30 | 40 | 60 | 80 | 100 | ||
| 1/8″ or 1/4″ | 1.0 | .50 | .71 | .86 | 1.0 | 1.2 | 1.4 | 1.6 |
| 1.3 | .65 | .92 | 1.1 | 1.3 | 1.6 | 1.8 | 2.1 | |
| 1.5 | .75 | 1.1 | 1.3 | 1.5 | 1.8 | 2.1 | 2.4 | |
| 2.0 | 1.0 | 1.4 | 1.7 | 2.0 | 2.5 | 2.8 | 3.2 | |
| 3.0 | 1.5 | 2.1 | 2.6 | 3/0 | 3.7 | 4.2 | 4.7 | |
| 4.0 | 2.0 | 2.8 | 3.5 | 4.0 | 4.9 | 5.7 | 6.3 | |
| 1/4″ | 5.0 | 2.5 | 3.5 | 4.3 | 5.0 | 6.1 | 7.1 | 7.9 |
| 5.5 | 2.8 | 3.9 | 4.8 | 5.5 | 6.8 | 7.8 | 8.7 | |
| 6.0 | 3.0 | 4.2 | 5.2 | 6.0 | 7.3 | 8.5 | 9.5 | |
| 7.0 | 3.5 | 4.9 | 6.1 | 7.0 | 8.6 | 9.9 | 11.1 | |
| 1/4″ or 3/8″ | 8.0 | 4.0 | 5.7 | 6.9 | 8.0 | 9.8 | 11.2 | 12.7 |
| 9.0 | 4.5 | 6.4 | 7.8 | 9.0 | 11.1 | 12.7 | 14.3 | |
| 10 | 5.0 | 7.1 | 8.6 | 10.0 | 12.2 | 14.1 | 15.8 | |
| 3/8″ or 1/2″ | 12 | 6.0 | 8.5 | 10.4 | 12.0 | 14.7 | 17.0 | 19.0 |
| 15 | 7.5 | 10.6 | 13.0 | 15.0 | 18.4 | 21.2 | 23.7 | |
| 1/2″ | 20 | 10.0 | 14.1 | 17.3 | 20.0 | 24.5 | 28.3 | 31.6 |
| 30 | 15.0 | 21.3 | 26.0 | 30.0 | 37.0 | 42.5 | 47.5 | |
| 3/4″ | 40 | 20.0 | 28.4 | 14.8 | 40.0 | 49.0 | 56.5 | 53.5 |
| Pipe Size | Dimensions | Weight (oz.) | ||
| A | B | C | ||
| 1/8 | 5/8 | 3/18 | 7/17 | 1/2 |
| 1/4 | 15/16 | 7/16 | 5/8 | 1 |
| 3/8 | 1 | 7/16 | 3/4 | 1 1/2 |
| 1/2 | 1 7/32 | 17/32 | 7/8 | 1 3/4 |
| 3/4 | 1 3/8 | 9/16 | 1 1/16 | 4 1/2 |
© 2021 Copyright hp Technik GmbH - Alle Rechte Vorbehalten
