Menu
The B-25 Nozzles are of two piece construction with large tangential metering slots in the internal Disc to give a nonrestrictedflow with a uniform “Solid” distribution. Sizes from 3/8″ NPT to 3/4″ NPT are made from bar stock while larger sizes are castings. For special applications, a hollow cone spray can be produced from this same design. These Nozzles with high flow rates and coarser sprays are used in gas scrubbing, adsorption towers, brine spraying, and chemical and industrial processing.
AAMA KIT Water test kit includes:
(1) B-25 6.030 W/1/2″ FNPT
(1) 3/4″ Globe valve
(1) 3/4″ Garden hose adaptor
(1) 0-60 PSI Pressure gauge
(1) Case Fully assembled and ready to use!
Material: Brass is standard in sizes up to 3/4″ NPT. Also available in any machinable material. Sizes 1″ NPT. Also available in any machinable material. Sizes 1″ NPT and larger are Cast Red Brass but can also be ordered in Cast Iron or any other machinable cast material.
Spray Angles: 80° at 40 PSI.
Pipe Connection: 3/8″, 1/2″, 3/4″, 1″, 1 1/2″, 2″ NPT.
| B-25 Capacities: Gallons Per Minute | |||||||||||
| Pipe Size | Nozzle No.* | Operating Pressure: Lbs. Per Square Inch | Dimensions and Widtd | ||||||||
| 5 | 10 | 20 | 40 | 80 | 100 | Lengt | Diameter | Hexagon | Weight (oz.) | ||
| 3/8″ | 2.5 | 9 | 1.2 | 1.8 | 2.5 | 3.5 | 3.9 | 1 5/8″ | 7/8″ | 7/8 | 3 1/2 |
| 3.0 | 1.1 | 1.5 | 2.1 | 3.0 | 4.2 | 4.7 | |||||
| 3.5 | 1.2 | 1.7 | 2.5 | 3.5 | 4.9 | 5.5 | |||||
| 4.0 | 1.4 | 2.0 | 2.8 | 4.0 | 5.7 | 6.3 | |||||
| 1/2″ | 4.5 | 1.6 | 2.2 | 3.2 | 4.5 | 6.3 | 7.1 | 2″ | 1 1/8″ | 1 1/8 | 7 1/2 |
| 5.0 | 1.8 | 2.5 | 3.5 | 5.0 | 7.1 | 7.9 | |||||
| 6.0 | 2.1 | 3.0 | 4.2 | 6.0 | 8.5 | 9.5 | |||||
| 1/2″ or 3/4″ | 7.0 | 2.5 | 3.5 | 4.9 | 7.0 | 9.9 | 11.1 | ||||
| 8.0 | 2.8 | 4.0 | 5.6 | 8.0 | 11.3 | 12.6 | |||||
| 3/4″ | 9.0 | 3.2 | 4.5 | 6.4 | 9.0 | 12.7 | 14.2 | 2 1/4″ | 1 3/8″ | 1 3/8 | 12 |
| 10.0 | 3.5 | 5.0 | 7.1 | 10.0 | 14.1 | 15.8 | |||||
| 12.0 | 4.2 | 6.0 | 8.5 | 12.0 | 17.0 | 19.0 | |||||
| 15.0 | 5.3 | 7.5 | 10.6 | 15.0 | 21.2 | 23.7 | |||||
| * Nozzle No. is capacity in GPM @ 40 PSI water pressure | |||||||||||
| 1″ | 17/64″ ori. | 4.2 | 6.0 | 8.4 | 2 7/16″ | 1 7/16″ | 1 5/8 | 12 | |||
| 1 1/2″ | 9/16″ ori | 16.3 | 21.1 | 32.6 | 3 7/16″ | 1 21/32″ | 1 5/16 | 26 1/2 | |||
| 2″ | 3/4″ ori. | 24.5 | 34.5 | 49.0 | 4 1/4″ | 2 7/15″ | 2 3/4 | 47 | |||
Need additional infos? Please contact us
hp-TECHNIK GmbH Industrial Pumps, Conveying units and plant construction
