Menu
The H-530 is a simple Nozzle which is a variation of the nonclog principle. Nozzle consists of two parts, the Body which contains the inlet pipe connection and the orifice; and a Cap which forms the bottom of the Swirl Chamber. The solid cone spray is uniformly distributed over the entire area of coverage. Typically used where a right angle connection is required for gas scrubbing, rinsing, washing, quenching and dust control.
Spray Angles: 80° at 40 PSI.
Material: Brass. Available as a special in any machinable material.
Pipe Connections:1/4″, 3/8″, 1/2″, 3/4″ female NPT.
| Pipe Size | Nozzle No. * | Operating Pressure: Lbs. Per Square Inch | ||||||
| 10 | 20 | 30 | 40 | 60 | 80 | 100 | ||
| 1/4″ | 62 | 0.26 | 0.36 | 0.44 | 0.51 | 0.62 | 0.72 | 0.81 |
| 78 | 0.38 | 0.58 | 0.70 | 0.83 | 1.0 | 1.2 | 1.3 | |
| 93 | 0.60 | 0.85 | 1.0 | 1.2 | 1.5 | 1.7 | 1.9 | |
| 104 | 0.75 | 1.0 | 1.3 | 1.5 | 1.8 | 2.1 | 2.4 | |
| 109 | 0.80 | 1.1 | 1.4 | 1.6 | 2.0 | 2.3 | 2.5 | |
| 140 | 1.0 | 1.5 | 1.8 | 2.1 | 2.6 | 3.0 | 3.3 | |
| 156 | 1.3 | 1.8 | 2.2 | 2.5 | 3.1 | 3.5 | 4.0 | |
| 171 | 1.4 | 2.0 | 2.5 | 2.9 | 3.6 | 4.1 | 4.6 | |
| 187 | 1.5 | 2.1 | 2.6 | 3.0 | 3.7 | 4.2 | 4.7 | |
| 3/8″ | 234 | 2.5 | 3.5 | 4.3 | 5.0 | 6.1 | 7.1 | 7.9 |
| 250 | 3.3 | 4.7 | 5.8 | 6.7 | 8.2 | 9.4 | 10.6 | |
| 1/2″ | 281 | 4.2 | 5.9 | 7.2 | 8.3 | 10.2 | 11.8 | 13.2 |
| 3/4″ | 312 | 5.3 | 7.5 | 9.1 | 10.6 | 13.0 | 15.0 | 16.7 |
| 343 | 5.7 | 8.0 | 9.8 | 11.3 | 13.8 | 16.0 | 17.8 | |
| 375 | 6.6 | 9.3 | 11.4 | 13.2 | 16.2 | 18.6 | 20.8 | |
| 406 | 7.6 | 10.7 | 13.1 | 15.1 | 18.5 | 21.3 | 23.8 | |
| Pipe Size | Dimensions | Weight (oz.) | |||
| A | B | C | D | ||
| 1/4 | 1 5/16 | 25/32 | 5/8 | 5/8 | 2 |
| 3/8 | 1 21/32 | 15/18 | 3/4 | 3/4 | 3 1/2 |
| 1/2 | 1 15/16 | 1 7/32 | 7/8 | 1 | 7 |
| 3/4 | 2 1/2 | 1 9/16 | 1 1/4 | 1 1/4 | 13 1/2 |
Need additional infos? Please contact us
hp-TECHNIK GmbH Industrial Pumps, Conveying units and plant construction
