Menu
The oil operating tanks may be filled with an external supply pump. Using a freely programmable µCon III model control system and a relevant capacitive level recording system, the fill levels in the operating tanks are regulated. The gas emissions of the medium when conveying will be carried away by an air discharge port. This ensures a bubble-free supply of the consumption points with fuel. The filling pump(s) can be controlled by the available µCon III control system. However, it is also possible to activate them using a separate pump control system. It is designed and tested to DIN EN 12 514 – 1.
An ideal place of installation of the operating tank is in the immediate vicinity of the consumption points.
| Model | Tank | Volume / litres during switching | Tank dimensions | Filling port connection |
Oil pan | Item No. | |||||
| Model | max. capacity in l |
min / In | max / Out | Overfilled / l | Length | Width | Height | ||||
| ÖVB 70 | NG 70 | 63 | 9 | 55 | 60 | 605 | 465 | 380 | DN 15 | 800 x 600 | 0420 500 |
| ÖVB 160 | E 160 | 160 | 50 | 130 | 150 | 810 | 640 | 560 | DN 20 | 1160 x 745 | 0420 510 |
| ÖVB 250 | E 250 | 280 | 50 | 130 | 150 | 1010 | 700 | 580 | DN 25 | 1300 x 1100 | 0420 520 |
Other sizes on request
For air discharge port connection and extraction connections, as for suction unit, see table on
1 Pump unit (single or double)
2 Oil operating tank
2.1 Tank control system
2.2 Air discharge port
2.3 Manometer
2.4 Ball valve
2.5 Pressure switch
2.6 Oil filter
2.7 Nonreturn valve
2.8 Oil pan
2.9 Leakage detector
2.10 Level sensor
2.11 Spill protection
2.12 Bypass connection
2.13 Consumer connection
Need additional infos? Please contact us
hp-TECHNIK GmbH Industrial Pumps, Conveying units and plant construction
